0900113

https://www.phoenixcontact.com/us/products/0900113 

## Electronic device circuit breaker - ECP-E 1A - 0900113 

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid 

(http://phoenixcontact.com/download) 

Electronic device circuit breaker, Number of positions: 1, Connection method: Screw connection, Width: 12.5 mm, Fuse type: Electronic, Fuse type: Automatic device, Mounting type: On base element, Color: black 

## Product Features 

Can be plugged onto TMCP SOCKET M base 

Design width of just 12.5 mm 

The operating or error state is indicated by a multi-color LED as well as an integrated status output (12) 

## Key commercial data 

|Packing unit|1 pc|
|---|---|
|Weight per Piece (excluding packing)|43.8 GRM|
|Custom tariff number|85363030|
|Country of origin|Germany|



## Technical data 

## General 

|Installation instructions|When mounted in rows without convection cooling, the nominal device<br>current should only be led to a maximum of 80% due to the thermal effect<br>during continuous operation (100% operating factor).<br>Special precautionary measures must be taken in systems or machines, to<br>prevent components from restarting (e.g., use of a safety PLC).<br>Parallel connection of multiple circuit breakers is not permitted.|
|---|---|
|Mounting type|On base element|
|Color|black|
|Number of positions|1|
|Surge voltage category|II|
|Insulating material|PA66/6|
|Inflammability class according to UL 94|V0|



Electrical data 

10/10/2014   Page 1 / 5 

https://www.phoenixcontact.com/us/products/0900113 

## Electronic device circuit breaker - ECP-E 1A - 0900113 

Technical data Electrical data Fuse Electronic Fuse type Automatic device Rated surge voltage 0.5 kV Operating voltage 24 V DC 18 V DC ... 32 V DC Nominal current IN 1 A Required backup fuse not required, integrated failsafe element Dielectric strength max. 32 V DC (Load circuit) Pollution degree 2 Surge voltage category II Insulating material group I Switching capacity ICN Active current limitation Closed-circuit current range I0 typ. 25 mA ±5 mA (When switched on) ~~—-~~ Dimensions Height 60 mm Width 12.5 mm Depth 70 mm Height NS 35/7,5 144 mm Height NS 35/15 151.5 mm Complete module height 115 mm Complete module width 38 mm Complete module depth 112.5 mm Ambient conditions Degree of protection IP30 (Actuation area) Ambient temperature (operation) 0 °C ... 50 °C (non-condensing) ~~——-~~ Connection data Conductor cross section stranded, with ferrule without plastic sleeve min. 0.5 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 10 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.5 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 10 mm² 2 conductors with same cross section, solid min. 0.5 mm² 2 conductors with same cross section, solid max. 4 mm² 2 conductors with same cross section, stranded min. 0.5 mm² 2 conductors with same cross section, stranded max. 4 mm² 2 conductors with same cross section, stranded, ferrules without plastic 0.5 mm² sleeve, min. ~~=~~ 10/10/2014   Page 2 / 5 

https://www.phoenixcontact.com/us/products/0900113 

## Electronic device circuit breaker - ECP-E 1A - 0900113 

## Technical data 

|Connection data|
|---|
|2 conductors with same cross section, stranded, ferrules without plastic<br>sleeve, max.<br>2.5 mm²<br>2 conductors with same cross section, stranded, TWIN ferrules with plastic<br>sleeve, min.<br>0.5 mm²<br>2 conductors with same cross section, stranded, TWIN ferrules with plastic<br>sleeve, max.<br>6 mm²<br>Connection method<br>Screw connection<br>Stripping length<br>10 mm<br>Screw thread<br>M4<br>~~S=s=~~|
|Standards and Regulations|
|Standards/specifications<br>UL 2367<br>UL 508<br>CSA 22.2 No. 14<br>~~———~~|
|Classifications|
|eCl@ss<br>eCl@ss 4.0<br>27141116<br>eCl@ss 4.1<br>27141116<br>eCl@ss 5.0<br>27141116<br>eCl@ss 5.1<br>27141116<br>eCl@ss 6.0<br>27141116<br>eCl@ss 7.0<br>27141116<br>eCl@ss 8.0<br>27141116<br>~~=~~|
|ETIM<br>ETIM 2.0<br>EC000899<br>ETIM 3.0<br>EC000899<br>ETIM 4.0<br>EC000899<br>ETIM 5.0<br>EC000899<br>~~Ss~~|
|UNSPSC<br>UNSPSC 6.01<br>30211812<br>UNSPSC 7.0901<br>39121411<br>UNSPSC 11<br>39121411<br>UNSPSC 12.01<br>39121411<br>UNSPSC 13.2<br>39121411<br>~~SSS~~|



10/10/2014   Page 3 / 5 

https://www.phoenixcontact.com/us/products/0900113 

## Electronic device circuit breaker - ECP-E 1A - 0900113 

## Approvals 

Approvals 

Approvals 

UL Recognized 

Ex Approvals 

Approvals submitted 

Approval details 

UL Recognized ~~ee~~ Accessories 

Accessories 

Marker pen 

Marker pen - X-PEN 0,35 - 0811228 

Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm 

## Terminal marking 

Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 

Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm 

10/10/2014   Page 4 / 5 

https://www.phoenixcontact.com/us/products/0900113 

## Electronic device circuit breaker - ECP-E 1A - 0900113 

## Accessories 

Zack marker strip - ZB 6/WH-100:UNBEDRUCKT - 5060935 

Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm 

## Drawings 

## Block diagram 

## Diagram 

**==> picture [444 x 129] intentionally omitted <==**

**----- Start of picture text -----**<br>
cc | LINE (+) ~O — On/Off — o 104 RS N N<br>103<br>cc | Reset GND (-) O r d £ 102 =<br>— 3 ee 10<br>5<br>a) Reset O ° 1 i<br>(o) |<br>Status<br>———]  | LOAD (L+) O 0,010,1 ee eee<br>0 1 2 IK 3<br>— _<br>Multiples of | N<br>1<br>11<br>13<br>14<br>12<br>2<br>**----- End of picture text -----**<br>


Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 

10/10/2014   Page 5 / 5