0805HQ-6N2XJLC

Web Sample Tools & Support page & buy software & FAQ 

Document 197-1 

Halogen Free 

AEC Q200 +125°C 

## **– Chip Inductors 0805HQ (2012)** 

The 0805HQ Series offers high Q factors and high inductance in an 0805 size. In addition, current handling has been improved with significantly lower DCR values. 

Like all Coilcraft wire wound ceramic chip inductors, the 0805HQ Series provides exceptional SRFs, tight inductance tolerance and batch consistency. 

For even higher Qs and inductance, consider our surface mount spring inductors that combine the high Q of an air wound coil with the convenience of automatic placement. 

Coilcraft **Designer’s Kit C325** contains samples of all 5% inductance tolerance parts. To order, contact Coilcraft or visit **http://order.coilcraft.com** . 

||**Inductance**2|**Percent**||**SRF min**5|**DCR max**6|**Irms**7|**Color**|
|---|---|---|---|---|---|---|---|
|**Part number**1|**(nH)**|**tolerance**3|**Q min**4|**(GHz)**|**(Ohms)**|**(A)**|**code**8|
|0805HQ-2N5XJR_|2.5 @ 250 MHz|**5**|80 @ 1500 MHz|10.30|0.020|1.6|Black|
|0805HQ-5N6XJR_|5.6 @ 250 MHz|**5**|98 @ 1500 MHz|6.10|0.035|1.6|Brown|
|0805HQ-6N2XJR_|6.2 @ 250 MHz|**5**|88 @ 1000 MHz|4.75|0.035|1.6|Red|
|0805HQ-12NX_R_|12 @ 250 MHz|**5,2**|80 @ 1000 MHz|3.00|0.045|1.6|Orange|
|0805HQ-16NX_R_|16 @ 250 MHz|**5,2**|72 @ 500 MHz|2.95|0.060|1.5|Yellow|
|0805HQ-18NX_R_|18 @ 250 MHz|**5,2**|75 @ 500 MHz|2.55|0.060|1.4|Green|
|0805HQ-20NX_R_|20 @ 250 MHz|**5,2**|70 @ 500 MHz|2.05|0.055|1.4|Blue|
|0805HQ-27NX_R_|27 @ 250 MHz|**5,2**|75 @ 500 MHz|2.00|0.070|1.3|Violet|
|0805HQ-30NX_R_|30 @ 250 MHz|**5,2**|65 @ 500 MHz|1.95|0.095|1.2|Gray|
|0805HQ-39NX_R_|39 @ 250 MHz|**5,2**|65 @ 500 MHz|1.60|0.110|1.1|White|
|0805HQ-48NX_R_|48 @ 200 MHz|**5,2**|65 @ 500 MHz|1.40|0.095|1.2|Black|
|0805HQ-51NX_R_|51 @ 200 MHz|**5,2**|65 @ 500 MHz|1.40|0.120|1.0|Brown|



1. When ordering, specify **tolerance** , **termination** and **packaging** codes: ~~—}~~ | **0805HQ-51NXJRC** 

- **Tolerance: G** = 2% **J** = 5% (Table shows stock tolerances in bold.) **Termination: R** = RoHS compliant matte tin over nickel over silverplatinum-glass frit. 

   - **E** = Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations. 

   - **L** = RoHS compliant, not halogen-free. Silver-palladiumplatinum-glass frit terminations. 

   - Special order: **T** = RoHS tin-silver-copper (95.5/4/0.5) or **S** = non-RoHS tin-lead (63/37). 

- **Packaging: C =** 7” machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge). 

   - **D =** 13” machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). 

   - **B =** Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C. 

2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/ HP 4286 impedance analyzer with Coilcraft-provided correlation pieces. 

**Core material** Ceramic 

**Environmental** RoHS compliant, halogen free 

**Terminations** RoHS compliant matte tin over nickel over silver platinumglass frit. Other terminations available at additional cost. 

**Weight** 10.5 – 12.5 mg 

**Ambient temperature** –40°C to +125°C with I rms current 

**Maximum part temperature** +140°C (ambient + temp rise) 

**Storage temperature** Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C 

**Resistance to soldering heat** Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles 

## **Temperature Coefficient of Inductance (TCL)** +25 to +125 ppm/°C 

**Moisture Sensitivity Level (MSL)** 1 (unlimited floor life at <30°C / 85% relative humidity) 

**Packaging** 2000/7″ reel; 7500/13″ reel. Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.65 mm pocket depth 

**PCB washing** Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. 

3. Tolerances in bold are stocked for immediate shipment. 

4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 

5. For SRF less than 6 GHz, measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. For SRF greater than 6 GHz, measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD -D test fixture. 

6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF840 test fixture. 

7. Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings 

8. Each part is marked with a single dot. The color dots are not unique 

- identifiers and correspond to multiple inductance values. 

9. Electrical specifications at 25°C. 

Refer to Doc 362 “Soldering Surface Mount Components” before soldering. 

**US** +1-847-639-6400   sales@coilcraft.com **UK** +44-1236-730595   sales@coilcraft-europe.com **Taiwan** +886-2-2264 3646   sales@coilcraft.com.tw **China** +86-21-6218 8074   sales@coilcraft.com.cn **Singapore** + 65-6484 8412   sales@coilcraft.com.sg 

Document 197-1 Revised 08/08/22 

© Coilcraft Inc. 2022 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. 

Document 197-2 

**==> picture [90 x 42] intentionally omitted <==**

## **Chip Inductors 0805HQ Series (2012) Typical Q vs Frequency** 

## **Typical L vs Frequency** 

**==> picture [284 x 184] intentionally omitted <==**

**----- Start of picture text -----**<br>
140<br>6.2 nH<br>HalogenFree 120 16 nH<br>2.5 nH<br>100<br>Q200AEC+125°C 80 20 nH<br>30 nH<br>60<br>48 nH<br>40<br>20<br>0<br>10 100 1000 5000<br>Frequency (MHz)<br>Q Factor<br>**----- End of picture text -----**<br>


**==> picture [242 x 184] intentionally omitted <==**

**----- Start of picture text -----**<br>
70<br>60 48 nH<br>50<br>40 30 nH<br>30 20 nH<br>20<br>16 nH<br>10<br>6.2 nH<br>0 2.5 nH<br>1 10 100 1000 5000<br>Frequency (MHz)<br>Inductance (nH)<br>**----- End of picture text -----**<br>


**==> picture [242 x 101] intentionally omitted <==**

**----- Start of picture text -----**<br>
B<br>H<br>overall C<br>Pick and<br>F place I<br>material<br>A G J<br>F I<br>E D<br>terminal Terminal wraparound: Recommended<br>approx 0.015/0,38 both ends Land Pattern<br>**----- End of picture text -----**<br>


**A B C D max max max ref E F G H I J** 0.090 0.068 0.060 0.020 0.050 0.020 0.040 0.070 0.040 0.030 inches 2,29 1,73 1,52 0,51 1,27 0,51 1,02 1,78 1,02 0,76 mm **Note:** Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. 

**==> picture [118 x 44] intentionally omitted <==**

Document 197-2 Revised 08/08/22 

© Coilcraft Inc. 2022 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. 

**US** +1-847-639-6400   sales@coilcraft.com **UK** +44-1236-730595   sales@coilcraft-europe.com **Taiwan** +886-2-2264 3646   sales@coilcraft.com.tw **China** +86-21-6218 8074   sales@coilcraft.com.cn **Singapore** + 65-6484 8412   sales@coilcraft.com.sg